Category Archives: File backup: Server
Category Contents
- File backup: Server
- How to perform backup seeding
- Forgotten password
- Stop a running backup
- Restarting or stopping the backup scheduler
- Where are the log files located?
- Fixing missed backups
- Disable the CDP Service
- Shutdown Computer After Scheduled Backup
- Deleting data from the offsite servers
- How to recover/migrate the locally cached config
- Uninstalling the Mac file backup
- Add or change a backup notification email address.
- Installing file backup for Mac
- Best practice medical restore guide
- How to login to your backup account
- Installing file backup server edition on Linux
- Errors backing Dropbox or OneDrive folders
- Exclude files or folders from the backup
- [Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied.
- How to reset/flush the local profile
- Recommended power settings
- Deleting previous backup jobs
- Deleting an entire backup set from the offsite servers
- How to check the scheduler log file
- Removing a backup set from the offsite servers
- Applying a hotfix
- Why am I being prompted to setup a trial registration?
- Change the user the scheduler runs as
- Enabling delta merging
- Warning: Backup source "XXXX" does not exist!
- How to check backup reports/log files
- Change login password
- Can't connect to backup server
- Where is the backup profile located
- Moving deleted data from retention back into data area
- How to run the file backup agent under Mac OS
- How to flush the spooling folder
- How to check the user validation/rebuild progress
- Setting up a permanent auto-mounted share in OS X
- Email rule to filter backup reports
- Changing an account from/to desktop/server edition
- All about passwords
- Removing a backup set from the offsite servers (Web Console)
- Where are the program files located?
- Backing up shares from a Mac
- JVM royalty module is not enabled (Mac OSX)
- Agent interface hangs on startup
- Windows cannot access device, path or file
- File backup: Server: general issues
- Backup Interrupted by System Error - Maximum retry reached
- Error XXXX [AFTIndexFile.close] '\\ip address\BackupSpool\BackupSet\XXXX\RemoteTree.idx' has not been opened
- UNC path (eg: \\server\sharename) does not exist!
- Cannot start scheduler. User:'null', Home:'\\SERVER\Users\Username\.obm' Reason:null [info] No user defined!
- Cannot start scheduler. Reason: Another schedule contain the same user
- SystemState.bkf does not appear to be correct
- Error loading profile from server. Unable to connect to sHostname
- "\Directory_Path\File" has been removed already
- Repeated entries... The name of the file cannot be resolved by the system.
- [Microsoft][ODBC SQL Server Driver][SQL Server]The file "C:\ Documents and Settings\All Users\Documents\ACT\ACT for Windows 12\ Databases\ACT2010Demo.ADF" is compressed but does not reside in a read-only database or filegroup. The file must be decompressed.
- [Error][New File] File="XXXX" Error="Access is denied. "
- Error=’null’. Client agent will retry shortly
- The process cannot access the file because another process has locked a portion of the file
- Orphan checksum pair file
- Another Scheduler is running! This Scheduler will not start!
- "The system cannot find the path specified"
- Error: The device is not ready
- Error message: "unable to log to server"
- Java Heap Space
- Snapshot for Shadow Copy Set is missing
- [AFTDataFile.Row.read] START_OF_ROW not found. Offset=XXXX
- [Error][New File] File="XXXX" Error="Insufficient system resources exist to complete the requested service."
- CExBackup::HrESEBackupRestoreGetNodes: Error Number 0xc7ff07d7: Unable to perform the operation. Either you can not connect to the specified server or the service you are trying to connect to is not running.
- The file or directory is corrupted and unreadable
- [java.lang.SecurityException] The system cannot find the path specified.
- Error: network drive is not accessible or \\xxxx does not exist
- Backup Interrupted by System Error "{0}"
- Unable to generate Delta File, XXXX is being backed up in its entirety.
- [Seed Load] [Error][New File] File="XXXX" Error=File already exists "XXXX", (ErrorCode:-48)"
- The requested operation cannot be performed on a file with a user-mapped section open
- A nonrecoverable I/O error occurred on file "XXXX" 112(failed to retrieve text for this error. Reason: 15105
- Another backup job is still running. Backup skipped
- Path XXXX does not exist! (SQL Backup)
- Error: "Cannot get remote file list"
- Backup Interrupted by System Error {0}
- [java.lang.SecurityException] The system cannot find the path specified.
- Unable to log start to server. Error="Software caused connection abort: recv failed"
- Failed to GetUserProfileDirectory for wcDomain='XXXX' username='XXXX'. (2) The system cannot find the file specified. '.
- ERROR=MAPI_E_CALL_FAILED Detail=Unspecified error
- Error initializing bptree .... bfTable.bdb because it exists already
- [Thread][ERS][BackupReport][BackupReport.send] Error sending backup job report for User=XXXX
- How to check the event viewer for hardware issues
- Error: Database of "(local)" not found
- Error occurred during initialization of VM
- Warning: Backup source "XXXX" does not exist!
- Error during seeding (bptree, X has been closed or index corrupted)
- CExBackup::backupService:HrESEBackupSetup: Error Number 0xc7fe1f45: Instance not found
- Exception_Access_Violation_XXXXXX (Exchange 2010 Mail Level)
- Backup Interrupted By Scheduler
- Network error
- Exceeded the [In-File Delta] -> [Maximum no. of Delta] setting
- error: java.lang.OutOfMemoryError: unable to create new native thread
- Error: Multiple connections to a server or shared resource by the same user....
- Error: NetUse Path:\\xxxx Error: An extended error has occurred.
- No *.chk found for database 'XXXX'
- Cannot open Data fork
- No checksum file found. File X is being backed up in its entirety
- SQL Server Driver][SQL Server]Cannot open backup device XXXX Operating system error 3(error not found)
- ShadowCopy\ipc\running (Access is denied)
- Unexpected exception.... Data error (cyclic redundancy check)
- Another snapshot of this volume is already created
- Error: A dynamic link library DLL (MSExchangePS64.dll) initialization routine failed
- The parameter is incorrect
- Generic log error messages are shown in capitals
- E-mail Account Quota exceeded. Unable to add "XXXX"
- LogonUserW Logon failure: the user has not been granted the requested logon type at this computer
- [ERROR] VSS_E_INSUFFICIENT_STORAGE
- JVM royalty module is not enabled (Mac OSX)
- Microsoft mail level backup - access denied warning
- Local copy Destination does not exist! Destination = XXXX
- No changes for 4 days
- Error: KeychainStore Ignored Exception, Duplicate extensions not allowed
- Windows cannot access device, path or file
- Error message "This machine is disabled for file encryption"
- File backup: Server: issues with backup
- Creating a file backup set
- Configuring backup sets in Linux/BSD (CLI mode)
- Processes to allow through software firewall
- Disabling the follow link option in Files Backup
- Stop backup if location not accessible
- How to run a manual backup via the system tray
- Configuring retention policies
- Microsoft Exchange backup setup & best practices
- Best practices for backing up network shares
- Medical Director Backup Setup Guide
- Running a backup multiple times a day
- How to change the backup schedule
- Installing file backup for Mac
- Best practice medical restore guide
- Warning: Backup source "XXXX" does not exist!
- Applying a hotfix
- Exception_Access_Violation_XXXXXX (Exchange 2010 Mail Level)
- How to add a backup filter to skip certain file types
- Configuring Windows Domain Authentication
- Fixing stuck backups/clearing the backup queue
- Migrating a backup account to a new machine
- Changing backup source selections
- How to set the temporary spooling location
- Best practices for achieving efficient backups
- Best practices for local copy backups
- How to move data within a backup set
- Pre-command script to stop backup
- How to set a fixed profile location
- Best practices for file backup agents
- How to increase the shadow storage area
- Backing up shares from a Mac
- How to use the offline backup feature
- Large replication alert
- Best Practice medical software backup
- File backup: Server: issues with restore
- Performing file/folder restoration
- Recovering an Exchange 2010 server
- How to restore Outlook profile from backup on macOS
- Medical Director Restore Guide
- Microsoft Exchange
- Exchange Backup
- MS-Exchange recommended schedule settings
- Microsoft Exchange mail level backup setup & best practices
- Exception_Access_Violation_XXXXXX (Exchange 2010 Mail Level)
- How to check event viewer for exchange errors
- Exchange Errors
- There is not enough space on the disk
- The database missed a previous full backup before the incremental backup
- No *.edb found for database....
- Expect log sequence 'XXXX' but found ....
- Either the target process, or the target thread's containing process, is a protected process
- CExBackup::backupService:HrESEBackupSetup: Error Number 0x50d: (null)
- Error Number 0xc8000232: Some log or patch files are missing
- An incremental backup cannot be performed when circular logging is enabled
- [Error][New Mail] XXXX The system cannot find the file specified
- The last backup jobs of XX and XX don't match for database XXXX
- Error: A dynamic link library DLL (MSExchangePS64.dll) initialization routine failed
- The writer operation failed because of a time-out between the Freeze and Thaw event. (VSS_E_WRITERERROR_TIMEOUT)
- The writer failed due to an error that would likely not occur if the entire backup, restore, or shadow copy creation process was restarted. (VSS_E_WRITERERROR_RETRYABLE)
- No *tmp.log found for database
- [logonSession] "XXXX" might have insufficient permissions to the mailbox ERROR=MAPI_E_LOGON_FAILED, Detail=ClassFactory cannot supply requested class
- The writer vetoed the shadow copy creation process during the backup preparation state. (VSS_WS_FAILED_AT_PREPARE_BACKUP)
- MAPI_E_UNCONFIGURED
- CExBackup::backupFile:HrESEBackupReadFile: Error Number 0xc7ff1004: (null)
- Exception_Access_Violation_XXXXXX (Exchange 2010 Mail Level)
- CExBackup::backupService:HrESEBackupSetup: Error Number 0xc80001f9: Backup is already active.
- No backup logs OR Exchange error "XXXX isn't assigned to any management roles"
- Exchange Recovery
- Microsoft SQL Server
- The statement BACKUP LOG is not allowed while the recovery model is SIMPLE
- How to add a dedicated SQL backup service account
- How to enable TCP/IP on MS-SQL server
- Enable MS-SQL server to listen on IP addresses
- How to enable mixed mode authentication in MS-SQL server
- Disable password expiration on SQL user login
- How to find the filesystem location of an MS-SQL database
- Microsoft SQL Server Restore Guide
- MS-SQL Backup
- MS-SQL Errors
- Cannot open backup device
- No database file found for 'XXXX'
- Error: SQL Server does not exist or access denied. ConnectionOpen (Connect())
- Error: Database of "(local)" not found
- [Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied.
- The backup of full-text catalog XXXX is not permitted
- [Microsoft][ODBC SQL Server Driver][SQL Server]Write on "XXXX" failed: 665(failed to retrieve text for this error. Reason: 15105)
- [Microsoft][ODBC SQL Server Driver][SQL Server]BACKUP DATABASE permission denied in database 'XXXX'.
- No database file found for 'Microsoft SQL Server\SERVER\INSTANCE\Database'
- SQL error "Fail to backup Database"
- A nonrecoverable I/O error occurred on file
- MS-SQL Restore
- MySQL
- ShadowProtect BMR